manufacturer
industry
  1. Products
  2. Force Measurement
  3. Force Testing Accessories
  4. Grips and Fixtures for Test Stands

Nicol Scales & Measurement offers a wide variety of grips and testing fixtures for all different types of tests and capacities.  This section shows you some of the fixtures that we offer.  It’s best to contact us to discuss your sample and test method so we can help you choose the best grips or fixtures for your specific testing needs.

Nicol Scales & Measurement offers a wide variety of grips and testing fixtures for all different types of tests and …

READ MORE

adapters Ametek Adapters Our range of Ametek Adapters for grips, fixtures and load cells includes screws, thread adapters, thread couplers, eye end adapters, ...
flexural grips Ametek Bending or Flexural Grips Ametek Bending or Flexural Grips are used for determining the flexural properties of rigid and semi-rigid materials such as glass, ...
Bollard grips Ametek Bollard Grips Ametek Bollard Grips are suitable for a wide range of samples such as fibers, yarn, thread, rope, string and strapping tape. ...
compression plates Ametek Compression Plates Round, square and rectangular compression plates are used for general compression testing. Our Ametek Compression Plates are available in aluminium for ...
Eccentric roller grips Ametek Eccentric Roller Grips Ametek Eccentric Roller Grips are ideal for all types of flat samples such as rubber, plastic film, plastic dumbbells, paper ...
hydraulic grips Ametek Hydraulic Grips Our range of Ametek Hydraulic Grips cover grips with either single or double actuator. Single actuator grips have one side ...
friction grips Ametek Peel and Friction Grips The Ametek Peel and Friction Grips come in different designs and are ideal for peeling samples at 90°, 180°, performing ...
Ametek pincer grips Ametek Pincer Grips Ametek pincer grips are ideal for testing small component parts such as electrical and electronic components where access is an ...
pneumatic grips Ametek Pneumatic Grips The Ametek Pneumatic Grips are ideal for all types of flat samples such as rubber, plastic film, plastic dumbbells, paper ...
Webbing grips Ametek Ribbon and Webbing Grips Ametek Ribbon and Webbing Grips with a split C-design allow the user to wrap the sample around a self-tightening roller ...
scissor grips Ametek Scissor Grips Ametek Scissor Grips are ideal for all types of flat samples such as rubber, plastic film, plastic dumbbells, paper and ...
Thread head grips Ametek Thread Head Grips Ametek Thread Head Grips consist of a two-part fixture. The main body is chosen to fit the eye end of ...
vice grips Ametek Vice Grips Ametek Vice Grips are ideal for all types of flat samples. The grips are single action or dual action and ...
Ametek/Chatillon Grips and Fixtures wedge grips custom grips Ametek Wedge Grips We offer a range of Ametek Wedge Grips for general tension testing of metals and plastic. The wedge design of ...
Ametek/Chatillon Grips and Fixtures wedge grips custom grips Ametek/Chatillon Grips and Fixtures Chatillon offers a complete array of grips and fixtures for material testing applications. If you don’t see what you need, ...
Mark-10 3-point 4-point Bend Fixtures for ASTM (C393, C1161, D790 G1095, G1096, G1097) Mark-10 3-point / 4-point Bend Fixtures for ASTM (C393, C1161, D790 G1095, G1096, G1097) The Mark-10 3-point / 4-point Bend Fixtures for ASTM (C393, C1161, D790 G1095, G1096, G1097) family of bend fixtures is ...
Mark-10 90° Peel Fixture (G1109) Mark-10 90° Peel Fixture (G1109) The Mark-10 90° Peel Fixture (G1109) is designed for peel testing of tapes, films, foil seals, and other materials, per ...
Mark-10 Adjustable Dual Roller Grip (G1085) Mark-10 Adjustable Dual Roller Grip (G1085) The Mark-10 Adjustable Dual Roller Grip (G1085) secures the ends of tubing, cables, and odd shaped samples for pull testing ...
Mark-10 ASTM F88 D1876 Film & Paper Peel Test Grips (G1008, G1015-1, G1015-2, G1015-3) Mark-10 ASTM F88 / D1876 Film & Paper Peel Test Grips (G1008, G1015-1, G1015-2, G1015-3) The Mark-10 ASTM F88 / D1876 Film & Paper Peel Test Grips (G1008, G1015-1, G1015-2, G1015-3) are designed for film, ...
Mark-10 Clevis Grip (G1077) Mark-10 Clevis Grip (G1077) The Mark-10 Clevis Grip (G1077) is designed for ergonomic assessment, spring testing, and other pull testing applications. A spring loaded ...
Mark-10 Coefficient of Friction Fixture (G1086) Mark-10 Coefficient of Friction Fixture (G1086) The Mark-10 Coefficient of Friction Fixture (G1086) is an integral part of a COF measurement system, typically including a motorized ...
Mark-10 Compression Plates (G1009, G1009-1, G1009-2, G1009-3) Mark-10 Compression Plates (G1009, G1009-1, G1009-2, G1009-3) The Mark-10 Compression Plates (G1009, G1009-1, G1009-2, G1009-3) are ideal for testing springs, foams, and other materials. The plates attach ...
Mark-10 Compression Plates, High Capacity (G1087, G1087-1) Mark-10 Compression Plates, High Capacity (G1087, G1087-1) The Mark-10 Compression Plates, High Capacity (G1087, G1087-1) feature integrated eye ends, and require eye end adapters to mount to ...
Mark-10 Cork Pull Fixture (G1105) Mark-10 Cork Pull Fixture (G1105) The Mark-10 Cork Pull Fixture (G1105) is designed to extract a cork stopper out of a bottle for pull force ...
Mark-10 Dual Roller Grips (G1002, G1002-1) Mark-10 Dual Roller Grips (G1002, G1002-1) The Mark-10 Dual Roller Grips (G1002, G1002-1) secure the ends of wire, cable, and tubing samples for pull testing. Engaging ...
Mark-10 Eccentric Roller Grip (G1094) Mark-10 Eccentric Roller Grip (G1094) The Mark-10 Eccentric Roller Grip (G1094) features a serrated cam, for effectively securing wires, plastics, textiles, and other materials in ...
Mark-10 Ergonomic Padded Attachments (G1019, G1020, G1021, G1112) Mark-10 Ergonomic Padded Attachments (G1019, G1020, G1021, G1112) The Mark-10 Ergonomic Padded Attachments (G1019, G1020, G1021, G1112) are designed for testing muscle strength and other job task requirements. ...
Mark-10 Flip Cap Pull Grip (G1104) Mark-10 Flip Cap Pull Grip (G1104) The Mark-10 Flip Cap Pull Grip (G1104) was designed to engage the tab on a flip cap for pull-off force ...
Mark-10 High Capacity Clevis Grip (G1090) Mark-10 High Capacity Clevis Grip (G1090) The Mark-10 High Capacity Clevis Grip (G1090) is designed for various pull testing applications, including extension spring testing, chain link ...
Mark-10 High Capacity Wire Rope Grip (G1092) Mark-10 High Capacity Wire / Rope Grip (G1092) The Mark-10 High Capacity Wire / Rope Grip (G1092) is designed for high capacity wire and rope pull testing applications. ...
Mark-10 High Capacity Wire Terminal Grip (G1093) Mark-10 High Capacity Wire Terminal Grip (G1093) The Mark-10 High Capacity Wire Terminal Grip (G1093) secures wire terminals, cables, connectors, and other samples for high capacity wire ...
Mark-10 Jacobs Chuck Pin Vise Grips (G1010, G1010-1, G1010-2) Mark-10 Jacobs Chuck Pin Vise Grips (G1010, G1010-1, G1010-2) The Mark-10 Jacobs Chuck Pin Vise Grips (G1010, G1010-1, G1010-2) are suitable for holding round samples such as wire or ...
Mark-10 Loop Tack Fixture (G1098) Mark-10 Loop Tack Fixture (G1098) The Mark-10 Loop Tack Fixture (G1098) is designed for tack force testing of pressure-sensitive adhesives, in conformance with ASTM D6195 ...
Mark-10 Magness Taylor Food Texture Probes (G1122-1, G1122-2) Mark-10 Magness Taylor Food Texture Probes (G1122-1, G1122-2) The Mark-10 Magness Taylor Food Texture Probes (G1122-1, G1122-2) probes are designed for penetrating fruits, vegetables, and other foods, for ...
Mark-10 Miniature Component Grip (G1003) Mark-10 Miniature Component Grip (G1003) The slender Mark-10 Miniature Component Grip (G1003) is ideal for testing small and hard-to-reach parts, such as electronic and mechanical ...
Mark-10 Miniature Filament Grip (G1078) Mark-10 Miniature Filament Grip (G1078) The Mark-10 Miniature Filament Grip (G1078) is used for securing small diameter wires and filaments in pull tests. The sample ...
Mark-10 Miniature Wedge Grip (G1062) Mark-10 Miniature Wedge Grip (G1062) The compact self-tightening Mark-10 Miniature Wedge Grip (G1062) with a capacity of 100 lbF (500 N) is ideal for a ...
Mark-10 Multi-jaw Grip (G1056) Mark-10 Multi-jaw Grip (G1056) The unique and universal Mark-10 Multi-jaw Grip (G1056) is designed for gripping round and irregularly shaped items. The jaws open ...
Mark-10 Opening Force Fixture (G1072) Mark-10 Opening Force Fixture (G1072) The Mark-10 Opening Force Fixture (G1072) is used to determine the opening force of flat folded cartons along their score ...
Mark-10 Parallel Jaw Grip, Large (G1100) Mark-10 Parallel Jaw Grip, Large (G1100) The Mark-10 Parallel Jaw Grip, Large (G1100) is ideal for general tensile and pull testing applications up to 2,000 lbF ...
Mark-10 Parallel Jaw Grip, Medium (G1101) Mark-10 Parallel Jaw Grip, Medium (G1101) The Mark-10 Parallel Jaw Grip, Medium (G1101) is ideal for general tensile and pull testing applications up to 200 lbF ...
Mark-10 Parallel Jaw Grip, Small (G1013) Mark-10 Parallel Jaw Grip, Small (G1013) The Mark-10 Parallel Jaw Grip, Small (G1013) is ideal for general pull testing applications. Manually tightened serrated jaws may be individually ...
Mark-10 Pneumatic Peel Test Grip (G1046) Mark-10 Pneumatic Peel Test Grip (G1046) This fully enclosed, air-powered Mark-10 Pneumatic Peel Test Grip (G1046) is ideal for seal strength testing of packaging, elongation testing ...
Mark-10 Puncture Fixture for ASTM D5748 (G1110) Mark-10 Puncture Fixture for ASTM D5748 (G1110) The Mark-10 Puncture Fixture for ASTM D5748 (G1110) is designed for determining the puncture resistance of plastic films and other ...
Mark-10 Ribbon Wrap Grip (G1111) Mark-10 Ribbon Wrap Grip (G1111) The Mark-10 Ribbon Wrap Grip (G1111) secures textile webbing, tape, and braided materials typically used in construction, shipping, and other ...
Mark-10 Rubber Tip (G1011) Mark-10 Rubber Tip (G1011) The Mark-10 Rubber Tip (G1011) attachment is designed to simulate a finger for testing pushbuttons, membrane switches, etc. Compatible with ...
Mark-10 Score Bend Fixture (G1071) Mark-10 Score Bend Fixture (G1071) The Mark-10 Score Bend Fixture (G1071) is used to produce a 90° bend in fiber board materials and plastics. The ...
Mark-10 Syringe Compression Fixture (G1089) Mark-10 Syringe Compression Fixture (G1089) The Mark-10 Syringe Compression Fixture (G1089) is designed to test compression force of a syringe plunger, as per ISO 7886-1 ...
Mark-10 Vise Grip, Self-Centering (G1106) Mark-10 Vise Grip, Self-Centering (G1106) The Mark-10 Vise Grip, Self-Centering (G1106) can be used in a wide range of tension and compression testing applications. Wide ...
Mark-10 Vise Grip, Standard (G1074) Mark-10 Vise Grip, Standard (G1074) The Mark-10 Vise Grip, Standard (G1074) can be used in a wide range of tension and compression testing applications. Wide ...
Mark-10 Wedge Grips (G1061, G1061-1, G1061-2, G1061-3) Mark-10 Wedge Grips (G1061, G1061-1, G1061-2, G1061-3) The Mark-10 Wedge Grips (G1061, G1061-1, G1061-2, G1061-3) with a capacity range of 50 lbf to 2,000 lbF (250 N ...
Mark-10 Wire Rope Grip, Bollard Style, Large (G1102) Mark-10 Wire / Rope Grip, Bollard Style, Large (G1102) The Mark-10 Wire / Rope Grip, Bollard Style, Large (G1102) is designed for wire, rope, and yarn pull testing applications. ...
Mark-10 Wire Rope Grip, Medium (G1103) Mark-10 Wire / Rope Grip, Medium (G1103) The Mark-10 Wire / Rope Grip, Medium (G1103) is designed for wire, rope, and yarn pull testing applications. Secures the ...
Mark-10 Wire Terminal Grips (G1001, G1001-1, G1001-2) Mark-10 Wire Terminal Grips (G1001, G1001-1, G1001-2) The Mark-10 Wire Terminal Grips (G1001, G1001-1, G1001-2) are designed for securing wire terminals, cables, connectors, and other samples for ...
Mark-10 Wire Terminal Pull Grip (G1076) Mark-10 Wire Terminal Pull Grip (G1076) The Mark-10 Wire Terminal Pull Grip (G1076) grip is designed for wire pull testing applications. The grip secures wire terminals, ...