Roll over thumbnail to zoom; Click to view larger image.
Rinstrum R400 Series Indicators Video (youtube)
Rinstrum R400 Series Indicators
The R400 series of indicators are designed with both the installer and operator in mind and cover a wide range of applications. They are engineered and built to last with reliability being foremost. The modular design allows for the installation to be commissioned with only the components required, saving on time and money.
Please allow 1 business day for a representative from Nicol Scales & Measurement to contact you. If your need is urgent, or if it’s after normal business hours, please call our local branch for service.
Up to 100,000 divisions, minimum of 0.25mV/division
0.1mV/V to 3.0mV/V
7.4V for up to 16 x 350 or 32 x 700 ohm load cells (4-wire or 6-wire plus shield) Maximum total load cell resistance: 1,000 ohms
A/D Converter Type
24bit Sigma Delta 8,388,608 internal counts
Operating Environment Temperature
Temperature: 10 to +50C ambient Humidity: <90% non-condensing Storage: 20 to +50C ambient IP65 when panel mounted or with rear boot (otherwise IP40)
LCD with 4 alpha-numeric displays and LED backlighting Primary display: 6 x 28.4mm high digits with units and annunciators 2nd display: 9 x 17.6 mm digits with units 3rd display: 8 x 6.1 mm digits 4th display: 4 x 7.6 mm digits
Setup & Calibration
Full digital with visual prompting in plain messages
Sliding window average from 0.1 to 30.0 seconds
Adjustable from +/- 2% to +/- 20% of full capacity
Standard Power Input
12 to 24VDC (15 VA max) - ON/OFF key with memory feature
AC power supplyInput: 110/240VAC 50/60Hz Output: 12VDC 15VA
Magnetically coupled infra-red communications Conversion cables available for RS-232 or USB
10 point linearity correction
Serial 1A: RS-232 serial port for remote display, network or printer supports. Serial 1B: RS-485 transmit only for remote display Transmission rate: 2400, 4800, 9600 or 19200 baud
Assignable Function Key
Single Range, Dual Range and Dual Interval
Battery Backed Clock Calendar
Battery life 10 years minimum
Rinstrum R400 Series Indicators Features
Flexibility is the key with its award winning modular accessory design. Modules include: additional serial options, input/outputs, analogue outputs, external buttons, Ethernet, Alibi (Data Storage Device) and battery or AC option.
Superior housings – two housing types are available:
R420 (ABS) rated to IP65
R423 (stainless steel) rated to IP66
Both housings are designed with extra attention to detail to increase their reliability in the field, thereby reducing unplanned downtime and servicing costs. For example, the R423 uses a high impact polycarbonate lens to protect the LCD from knocks.
Simple setup – use the menu system directly via the alpha numeric keypad or the configuration utility View400 on a PC.
Operator friendly – large multi-segment display that uses logical prompts along with dedicated and programmable function keys. Printing can be tailored with custom record, docket or reports printouts. Primary display is 29mm (1.1”) and secondary display 18mm.
Rugged Load Cell Input – Designed to take 16×320 ohm load cells; providing flexibility and reducing the need for summing hardware, simplifying the installation and saving money. The load cell input is protected with onboard transorbs to limit damage from external voltage surges.
Networking Capability – Support for both Ethernet and Profibus DP to improve integration into larger control systems
Robust Input/Output Modules (M4301, M4311, M4321, M4331) The R400 Series flexibility is provided through its broad range of modules that are easy to configure and neatly connect into the rear of the indicator. There are 4 module slots where an indicator can be equipped with only the features required for a given installation. An R400 indicator can be equipped with up to 32 I/O. These I/O are electrically isolated, designed for direct connection into PLC’s and are capable of driving low voltage actuators directly.
Isolated high side (400mA current source) drivers are capable of driving low voltage actuators directly or can be connected directly with PLC controllers.
Each module has 8 digital I/O ports which are limited to maximum input voltage of 30V and can drive up to 400mA.
Direct connection between I/O points is supported
Inputs are isolated to resist against system noise.
Button Module (M4302): The Button Module provides 4 voltage free inputs for use with switches or thumbwheels. The voltage free inputs eliminate the need to wire up complicate input driver circuits.
Isolated Communication Modules: Communication modules are in addition the built in RS232/RS485 ports on the R400 indicators.
Fully isolated and recommended for application where there is a risk of lightening or surges or where additional communication ports are required.
Precise Robust Analogue Output Module (M4401): The analogue module provides a 4-20mA or 0-10V analogue output and two digital I/O.
Isolated so as to resist against system noise and interference therefore reducing unnecessary callouts;
Precise with a 400Hz (2.5msec) update rate and 1/65,000 resolution. The fast update and high D to A conversion rate give a smooth output curve which helps a PLC to see more realistic readings (2.5msec step)
Scalable to suit the input on the PLC.
Two digital I/O provided the same as the M4301
Data Storage Device Module (M4501): The Data Storage Module provides non volatile alibi memory storage (6M bytes) according to WELMEC 7.2 L. Compatible with later versions of software.
Ethernet (M4221): The Ethernet Module provides 10/100 Base TX with auto negotiation (1 Raw bi-directional port and 10 Raw transmit only ports).
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.