Rice Lake Condec CYLinder REGulator

Rice Lake Condec Video (youtube)

Rice Lake’s Condec Cylinder Regulator (CYLREG) assembly allows the operator to ensure a properly regulated pressure output from an existing in-house nitrogen supply cylinder has a maximum charge of 3,000 psig. CYLREG has a maximum input pressure rating of 3,000 psig and a maximum operator controlled regulated output pressure based on selected model.

In the US, valve connections are sometimes referred to as “CGA connections,” since the Compressed Gas Association (CGA) publishes guidelines on what connections to use for what products (e.g., in the U.S., an argon, helium, krypton, neon, tetra fluoro methane, xenon or nitrogen cylinder will have a CGA-580 connection on the cylinder). These CYLREG assemblies have been designed for use with nitrogen, and the factory needs to be consulted prior to use with other gases. Note: if the nut on a CGA connection has a notch in it, it uses a left-handed thread.

CYLREG assembly has a Condec REG series pressure regulator with upstream (inlet) and downstream (outlet) pressure gauges. Once attached to the cylinder using supplied CGA-580 connection, unit allows operator to monitor cylinder supply pressure and regulate the flow of gas, based on pressure shown on the downstream gauge. Unit also has a male 7/16-20 37° AN-4 output port for attachment to downstream device. As an example, the output port connection may be attached to a Condec UPC5000 or UPC5100 portable pressure calibrator via standard fill-port hose for use in refilling their internal cylinder.

When a CYLREG assembly is mated with our patented Condec model Orion 2C Cased valve assembly, it allows the operator to have regulated cylinder pressure with finger-tip downstream adjustment utilizing the input and output needle valves and vernier.

Manufacturer:
Rice Lake Weighing Systems

Types:
Pressure Instrumentation

Industries:
Chemical & Petrochemical, Food & Beverage, Manufacturing

Application:
Pressure Regulators and Calibrators

Models
ModelProduct DescriptionAdd to Quote
124511Regulator, CYLREG 3000 Used with Nitrogen Cylinder 3000 PSIG Max Output Assembly Pressure Rating 3000 PSIG/206.9 Bar Output 3000 PSIG/206.9 Bar Max Input, 2 Inlet Ports one with CGA-580 Brass Cylinder Connection Nipple, Other with 0-4K FS Analog Gauge 2 Outlet Ports one with 1/4-37 DEG Male for connecting to output device downstream other with 0-4K FS Analog Gauge
152333Regulator, CYLREG 2000 Used with Nitrogen Cylinder 3000 PSI Max Output Assembly Pressure Rating 2000 PSI/138 Bar Output 3000 PSI/206.8 Bar Max Input, 2 Inlet Ports one with CGA-580 Brass Cylinder Connection Nipple, Other with 0-4K/280 Bar FS Analog Gauge 2 Outlet Ports one with 1/4-37 DEG Male for connecting to output device downstream other with 0-3000/206.8 Bar FS Analog Gauge
152317Regulator, CYLREG 1000 Used with Nitrogen Cylinder 3000 PSI Max Output Assembly Pressure Rating 1000 PSI/69 Bar Output 3000 PSI/206.8 Bar Max Input, 2 Inlet Ports one with CGA-580 Brass Cylinder Connection Nipple, Other with 0-4K/280 Bar FS Analog Gauge 2 Outlet Ports one with 1/4-37 DEG Male for connecting to output device downstream other with 0-1500/103.5 Bar FS Analog Gauge
152041Regulator, CYLREG 500 Used with Nitrogen Cylinder 3000 PSI Max Output Assembly Pressure Rating 500 PSI/34.5 Bar Output 3000 PSI/206.8 Bar Max Input, 2 Inlet Ports one with CGA-580 Brass Cylinder Connection Nipple, Other with 0-4K/280 Bar FS Analog Gauge 2 Outlet Ports one with 1/4-37 DEG Male for connecting to output device downstream other with 0-600/40 Bar FS Analog Gauge
Information
Rice Lake Condec CYLinder REGulator Features
  • Same Condec “REG” series regulator as used in our portable pressure calibrators and Source 3000
  • Low torque required by operator for pressure adjustment
  • Single stage, venting type with spring controlled piston
  • Integral inlet filter used to promote long life when used in clean systems
  • CGA-580 fitting for direct connection to the in-house cylinder
  • 1/4 inch, 37 degree male output port connection
  • Applications: Gas applications; In-House nitrogen cylinder regulation
Rice Lake Condec CYLinder REGulator Spec Sheet Condec CYLinder REGulator Spec Sheet
Literature
Rice Lake Condec CYLinder REGulator Literature Condec CYLinder REGulator Brochure
Condec REGulator Series Rice Lake Condec REGulator Series Rice Lake’s Condec REGulator Series may be integrated with one of our burst discs and/or pressure relief valves for fail safe ...
MPV-10K Rice Lake Condec MPV-10K Micrometering Precision Valve Ultimate control is at your fingertips with the MPV-10K micro-metering precision valve. The MPV-10K, a component of our pressure calibration standards, ...
Condec Components Rice Lake Optional Condec Components/Kits From decades of field-proven performance, Condec products lead the industry in precision instrumentation for pressure measurement and control. To outfit ...
orion Rice Lake Condec Orion 2C/Orion 3A Precision Pneumatic Controllers Ideal for use in testing environments, the Orion 2C and Orion 3A pneumatic pressure controllers provide unrivaled performance in a ...
Source 3000 Rice Lake Condec Source 3000 Portable Pneumatic Pressure Source A quick, accurate and portable pressure source, the new Source 3000 is designed for extended use wherever your job takes ...
PIN8000 Rice Lake Condec PIN8000/PIN8010 Pneumatic HI Source Pressure Intensifier Although, similar in design to the PIN7000, the PIN8000 features two output ports and our patented Orion 3A valve with ...
DLR334 Rice Lake Condec DLR334/DLR3110 Digital Pressure Indicator With high-accuracy features and a full range of options, the DLR334 digital pressure indicator and the DLR3110 19-inch rack-mount are the ...
Rice Lake Condec Pressure Indicator UPS3000 Rice Lake Condec UPS3000/3110/3210 Digital Pressure Indicator Rugged construction and smart features qualify the UPS3000 Series digital pressure indicators as the quickest, most cost-effective calibration solution available. Designed ...
UPC5200 Rice Lake Condec UPC5200/UPC5210 High Pressure Calibration Standard Providing sophisticated performance in high-pressure applications, the durable UPC5200 is the most effective pressure calibration standard in its class. The UPC5200 ...
UPC5100 Rice Lake Condec UPC5100/UPC5110 Pressure Vacuum Calibration Standard Designed for quick, convenient and accurate performance, the UPC5100 pressure calibration standard takes portability to a new level. By incorporating self-contained ...
UPC5000 Rice Lake Condec UPC5000/UPC5010 Pressure Calibration Standard Combining heavy-duty construction and precision performance, the UPC5000 offers flexibility for a variety of pressure calibrating applications. The compact UPC5000 includes ...