Minebea Intec Bending Beam Load Cell PR 6207

Minebea Intec Load Cells

The load cell PR 6207 is specially designed for tank and hopper weighing for use in platform scales or belt weighers. The design principle of the mounting kit PR 6007 will counterbalance movements arising from mechanical and thermal expansion or contraction of its supporting structure. A particular design characteristic is that the sensor is manufactured out of stainless steel (1.4122), and the membrane is made out of 1.4541. Therefore the line is distinguished with high measurement accuracy and high repeatability as well as stability and reliability. This is the sound basis for maintenance free work and years without any further adjustments. The hermetically sealed sensor allows you to use the device even under extreme operation conditions. The entire measurement chain can be calibrated without using a reference weight. Due to “matched output” technology, a damaged load cell can be exchanged without the need of re-calibration. This saves a tremendous amount of time during commissioning and in case of necessary replacement.

Product formerly listed as Sartorius-Intec Bending Beam Load Cell PR 6207.
Learn more about Minebea’s purchase of Sartorius’ industrial weighing assets

Bending Beam Load Cell PR 6207 6007 Spec Sheet

Load Cell Application and Test GuidelinesNovember 1, 2016

A load cell is a device that is used to measure weight or force. W hen a force is applied to it in a specific manner, a load cell produces an output signal that is proportional to the applied force. One end of a load cell is typically supported on a rigid structure while the […]

Load Cells for a Portable StructureNovember 1, 2016

During a measurement, weight acts on the load cell’s body and causes elastic deformation. The body has some spring constant. This strain (positive or negative) is converted into an electrical signal by a strain gauge installed on load cell. Read more about load cells here.

Tank Weighing Woes: Why Load Cells have a Bad Reputation and What Needs to be Done to Fix itNovember 1, 2016

Many manufacturing facilities currently have load cells installed in tank systems that are no longer operational. Most of the times the load cells are left in place and the electrical cables connecting to the controls are simply cut. Production Managers, QC Managers, and maintenance personnel alike have surely encountered “that tank” or “vessel” which never […]

Load cell construction: Double bending beam, all stainless steel, hermetically sealed, welded, filled with inert gas.
Material Body: Body 1.4122 (DIN 17440); Bellow 1.4541 (DIN 17440)
Protection: IP 67, DIN 40 050. The load cell can be submerged in water to a depth of 1.5m for 100hrs. robust, flexible, screened 4 x 0.34mm2
- sheath: grey, PVC
- diameter: D = 5.4mm
- length: 3m
Bending Radius: fixed installation r ≥ 60mm; with repeated bending r ≥ 150mm

Re-branding Minebea IntecNovember 8, 2017

The new Minebea Intec logo looks good on the equipment that was previously branded as Sartorius in their high precision industrial weighing line. The re-branding process is close to being completed, so if you are looking for a high precision Sartorius industrial scale, load cell or indicator, look for a Minebea Intec product instead.