Mark-10 WT-205
Measure wire crimp pull forces accurately and efficiently with the portable and customizable Mark-10 WT-205 tester. Easily apply up to 200 lbF (1,000 N) of force via an ergonomic lever. The tester’s standard adjustable terminal fixture contains multiple slots for diameters up to AWG 3 (0.25 in [6.3 mm]), while the self-tightening wedge grip securely clamps the free end of the cable.
A backlit graphic LCD displays real-time force, peak force, unit of measurement, and pass/fail indicators. Green and red pass/fail indicators may also be used. A load bar on the display shows when an overload is approaching.
Transfer data to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. The WT-205 stores up to 1,000 readings and calculates statistics. Upon sample break, the tester can automatically save and output the peak force and auto-zero in preparation for the next test, increasing testing efficiency.
Manufacturer:
Mark-10
Types:
Wire Crimp Pull Testers
| Model | Description | Add to Quote |
| WT-205 | Wire terminal tester, 200 lbF / 1,000 N | Add to Quote |
| Specification | |
| Capacity x Resolution: | 200 x 0.1 lbF 3200 x 2 ozF 100 x 0.05 kgF 1000 x 0.5 N 1 x 0.0005 kN |
| Accuracy: | ±0.2% of full scale |
| Wire gauge range*: | AWG30 - AWG3* |
| Wire diameter range: | 0.01 - 0.25 in 0.3 - 6.3 mm |
| Minimum sample length: | 2.1 in [53.3 mm], excluding termination |
| Maximum sample elongation: | 1.70 in 43.2 mm |
| Power: | AC adapter: 100-240VAC, 50-60 Hz, 0.3A Battery: Rechargeable 8.4V NiMH Low battery indicator appears when battery level is low, and tester powers off automatically when power reaches critical stage. |
| Battery Life: | Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use |
| Sampling rate: | 7,000 Hz |
| Outputs: | USB / RS-232: Configurable up to 115,200 baud Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices Analog: ±1 VDC, ±0.25% of full scale at capacity Set points: Three open drain lines, 40 VDC max., 100 mA DC max. |
| Safe overload: | 150% of full scale (display shows "OVER" at 110% and above) |
| Weight: | 16.1 ll 7.3 kg |
| Shipping weight: | 24.5 lb 11 kg |
| Warranty: | 3 years (see individual statement for further details) |
- Measures real-time and peak force values
- Ergonomic lever operation produces 200 lbF [1,000 N]
- USB, RS-232, Mitutoyo (Digimatic), and analog outputs
- Automatic output / data storage / zeroing upon sample break helps automate testing processes
- 1,000-point data memory with statistics and outputs
- Password protection prevents unauthorized changes
- Programmable set point indicators and outputs for pass/ fail determination
- High-speed 7,000 Hz sampling rate accurately captures peak force values
- Configurable audio alarms and key tones
- Mounting holes for bench mounting
 | The WT-205 Wire Crimp Pull Tester is shipped as shown and includes the following accessories: (1) Removable lever (1) USB cable (1) Battery (1) AC adapter (1) Certificate of calibration without data |
