Mark-10 Series F Family of Force TestersJanuary 3, 2023The Mark-10 Series F family of force testers is designed for tension and compression force testing applications, with force capacities ...Mark-10 Series F + EasyMESUR Tension/Compression Force Testers
Mark-10 Series F + EasyMESUR Tension/Compression Force Testers are ideal for everyday force measurement applications up to 1,500 lbF (6.7 kN). A modular function platform allows you to configure the system for basic applications or more demanding requirements. Measure and analyze data confidently with available graphing and reporting capabilities.
Series F test frames with EasyMESUR are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.
Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing ’s serial command library.
Sample setup and fine positioning are a breeze with available FollowMe force-based positioning – using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.
Engineered around a modular function platform, the Mark-10 Series F + EasyMESUR Tension/Compression Force Testers run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.
Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.
Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.
Manufacturer:
Mark-10
Types:
Force Testing Accessories Software, Motorized Test Stands
Industries:
Aerospace & Aviation, Chemical & Petrochemical, Food & Beverage, Laboratory & R&D, Manufacturing, Medical & Pharmaceutical, Plastics & Polymers, Transportation & Logistics
Models
| Model | Description | Add to Quote |
| F105-EM | Test frame with EasyMESUR control panel, vertical, 100 lbF / 0.5 kN | Add to Quote |
| F1505-EM | Test frame with EasyMESUR control panel, vertical, 1,500 lbF / 6.7 kN | Add to Quote |
| F1505S-EM | Test frame with EasyMESUR control panel, vertical, short, 1,500 lbF / 6.7 kN | Add to Quote |
| F305-EM | Test frame with EasyMESUR control panel, vertical, 300 lbF / 1.3 kN | Add to Quote |
| F505-EM | Test frame with EasyMESUR control panel, vertical, 500 lbF / 2.2 kN | Add to Quote |
| F505H-EM | Test frame with EasyMESUR control panel, horizontal, 500 lbF / 2.2 kN | Add to Quote |
| F755-EM | Test frame with EasyMESUR control panel, vertical, 750 lbF / 3.4 Kn | Add to Quote |
| F755S-EM | Test frame with EasyMESUR control panel, vertical, short, 750 lbF / 3.4 kN | Add to Quote |
| EMF001-1 | Distance measurement function, F105/F305/F505/F505H -EM | Add to Quote |
| EMF001-2 | Distance measurement function, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMF002-1 | Distance limits function, F105/F305/F505/F505H -EM | Add to Quote |
| EMF002-2 | Distance limits function, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMF003-1 | Preload function, F105/F305/F505/F505H -EM | Add to Quote |
| EMF003-2 | Preload function, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMF004-1 | High speed extension, F105/F305/F505/F505H -EM | Add to Quote |
| EMF004-2 | High speed extension, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMF005-1 | Low speed extension, F105/F305/F505/F505H -EM | Add to Quote |
| EMF005-2 | Low speed extension, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMF006-1 | Cycling function, F105/F305/F505/F505H -EM | Add to Quote |
| EMF006-2 | Cycling function, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMF007-1 | Break detection function, F105/F305/F505/F505H -EM | Add to Quote |
| EMF007-2 | Break detection function, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMF008-1 | Load holding function, F105/F305/F505/F505H -EM | Add to Quote |
| EMF008-2 | Load holding function, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMF009-1 | FollowMefunction, F105/F305/F505/F505H -EM | Add to Quote |
| EMF009-2 | FollowMefunction, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMF010-1 | Graphing & reporting function, F105/F305/F505/F505H -EM | Add to Quote |
| EMF010-2 | Graphing & reporting function, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMF011-1 | PC control function, F105/F305/F505/F505H -EM | Add to Quote |
| EMF011-2 | PC control function, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMP001-1 | Distance measurement package, F105/F305/F505/F505H -EM | Add to Quote |
| EMP002-1 | Speed extension package, F105/F305/F505/F505H -EM | Add to Quote |
| EMP002-2 | Speed extension package, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMP003-1 | Advanced functionality package, F105/F305/F505/F505H -EM | Add to Quote |
| EMP003-2 | Advanced functionality package, F755/F755S/F1505/F1505S -EM | Add to Quote |
| EMP-COMP-1 | Complete options package, F105/F305/F505/F505H -EM | Add to Quote |
| EMP-COMP-2 | Complete options package, F755/F755S/F1505/F1505S -EM | Add to Quote |
Information
Mark-10 Series F + EasyMESUR Tension/Compression Force Testers
| Specifcation | F105-EM | F305-EM | F505-EM | F505H-EM |
| Load capacity*: | 100 lbF[0.5 kN] | 300 lbF[1.3 kN] | 500 lbF[2.2 kN] | 500 lbF[2.2 kN] |
| Maximum travel: | 18.0 in [457 mm] | 18.0 in [457 mm] | 18.0 in [457 mm] | 18.0 in [457 mm] |
| Standard speed range: | 0.5 – 13 in/min [13 – 330 mm/min] | 0.5 – 13 in/min [13 – 330 mm/min] | 0.5 – 13 in/min [13 – 330 mm/min] | 0.5 – 13 in/min [13 – 330 mm/min] |
| Optional speed range: | 0.02 – 45 in/min [0.5 – 1,100 mm/min] | 0.02 – 45 in/min [0.5 – 1,100 mm/min] | 0.02 – 45 in/min [0.5 – 1,100 mm/min] | 0.02 – 45 in/min [0.5 – 1,100 mm/min] |
| Load accuracy(% of full scale) | Test frame: ±0.1% Force sensor: Series FS05: ±0.1% | Series FS06: ±0.15% | Series R07: ±0.15% | Test frame: ±0.1% Force sensor: Series FS05: ±0.1% | Series FS06: ±0.15% | Series R07: ±0.15% | Test frame: ±0.1% Force sensor: Series FS05: ±0.1% | Series FS06: ±0.15% | Series R07: ±0.15% | Test frame: ±0.1% Force sensor: Series FS05: ±0.1% | Series FS06: ±0.15% | Series R07: ±0.15% |
| Load sampling rate: | 5,000 Hz | 5,000 Hz | 5,000 Hz | 5,000 Hz |
| Data acquisition rate: | 100 Hz | 100 Hz | 100 Hz | 100 Hz |
| Speed accuracy: | ±0.2% of setting, virtually no variation with load | ±0.2% of setting, virtually no variation with load | ±0.2% of setting, virtually no variation with load | ±0.2% of setting, virtually no variation with load |
| Position accuracy: | ±0.006 in [0.15 mm], at any load or position | ±0.006 in [0.15 mm], at any load or position | ±0.006 in [0.15 mm], at any load or position | ±0.006 in [0.15 mm], at any load or position |
| Distance resolution: | 0.001 in [0.02 mm] | 0.001 in [0.02 mm] | 0.001 in [0.02 mm] | 0.001 in [0.02 mm] |
| Limit switch repeatability: | ±0.001 in [0.03 mm] | ±0.001 in [0.03 mm] | ±0.001 in [0.03 mm] | ±0.001 in [0.03 mm] |
| Power: | Universal input 100-240 VAC, 50/60 Hz, 120W | Universal input 100-240 VAC, 50/60 Hz, 120W | Universal input 100-240 VAC, 50/60 Hz, 120W | Universal input 100-240 VAC, 50/60 Hz, 120W |
| Fuse type: | 1.2 A, 250V, 3AG, SLO BLO | 1.2 A, 250V, 3AG, SLO BLO | 1.2 A, 250V, 3AG, SLO BLO | 1.2 A, 250V, 3AG, SLO BLO |
| Weight (test frame only): | 60 lb [27 kg] | 60 lb [27 kg] | 60 lb [27 kg] | 70 lb[32 kg] |
| Shipping weight: | 75 lb [34 kg] | 75 lb [34 kg] | 75 lb [34 kg] | 85 lb[39 kg] |
| Environmental conditions: | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95F [5 - 35C] Humidity range: up to 80% relative humidity at 31C, decreasing linearly to 50% relative humidity at 40C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95F [5 - 35C] Humidity range: up to 80% relative humidity at 31C, decreasing linearly to 50% relative humidity at 40C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95F [5 - 35C] Humidity range: up to 80% relative humidity at 31C, decreasing linearly to 50% relative humidity at 40C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95F [5 - 35C] Humidity range: up to 80% relative humidity at 31C, decreasing linearly to 50% relative humidity at 40C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 |
| Conformance: | CE, UKCA | CE, UKCA | CE, UKCA | CE, UKCA |
| Warranty: | 3 years [see individual statement for further details] | 3 years [see individual statement for further details] | 3 years [see individual statement for further details] | 3 years [see individual statement for further details] |
| F755-EM | F755S-EM | F1505-EM | F1505S-EM | |
| Load capacity*: | 750 lbF[3.4 kN] | 750 lbF[3.4 kN] | 1,500 lbF[6.7 kN] | 1,500 lbF[6.7 kN] |
| Maximum travel: | 32.0 in [813 mm] | 14.2 in [360 mm] | 32 in [813 mm] | 14.2 in [360 mm] |
| Standard speed range: | 0.5 - 24 in/min [10 - 600 mm/min] | 0.5 - 24 in/min [10 - 600 mm/min] | 0.5 - 24 in/min [10 - 600 mm/min] | 0.5 - 24 in/min [10 - 600 mm/min] |
| Optional speed range: | 0.001 - 60 in/min [0.02 - 1,525 mm/min] | 0.001 - 60 in/min [0.02 - 1,525 mm/min] | 0.001 - 70 in/min [0.02 - 1,800 mm/min] | 0.001 - 70 in/min [0.02 - 1,800 mm/min] |
| Load accuracy(% of full scale) | Test frame: ±0.1% Force sensor: Series FS05: ±0.1% Series R07: ±0.15% | Test frame: ±0.1% Force sensor: Series FS05: ±0.1% Series R07: ±0.15% | Test frame: ±0.1% Force sensor: Series FS05: ±0.1% Series R07: ±0.15% | Test frame: ±0.1% Force sensor: Series FS05: ±0.1% Series R07: ±0.15% |
| Load sampling rate: | 5,000 Hz | 5,000 Hz | 5,000 Hz | 5,000 Hz |
| Data acquisition rate: | 100 Hz | 100 Hz | 100 Hz | 100 Hz |
| Speed accuracy: | ±0.2% of setting, virtually no variation with load | ±0.2% of setting, virtually no variation with load | ±0.2% of setting, virtually no variation with load | ±0.2% of setting, virtually no variation with load |
| Position accuracy: | ±0.006 in [0.15 mm], at any load or position | ±0.006 in [0.15 mm], at any load or position | ±0.006 in [0.15 mm], at any load or position | ±0.006 in [0.15 mm], at any load or position |
| Distance resolution: | 0.001 in [0.02 mm] | 0.001 in [0.02 mm] | 0.001 in [0.02 mm] | 0.001 in [0.02 mm] |
| Limit switch repeatability: | ±0.001 in [0.03 mm] | ±0.001 in [0.03 mm] | ±0.001 in [0.03 mm] | ±0.001 in [0.03 mm] |
| Power: | Universal input 100-240 VAC, 50/60 Hz, 300W | Universal input 100-240 VAC, 50/60 Hz, 300W | Universal input 100-240 VAC, 50/60 Hz, 450W | Universal input 100-240 VAC, 50/60 Hz, 450W |
| Fuse type: | 4A, 3AG, SLO BLO | 4A, 3AG, SLO BLO | 4A, 3AG, SLO BLO | 4A, 3AG, SLO BLO |
| Weight (test frame only): | 184 lb[83 kg] | 149 lb[68 kg] | 197 lb[89 kg] | 157 lb[71 kg] |
| Shipping weight: | 235 lb[107 kg] | 195 lb[88 kg] | 247 lb[112 kg] | 205 lb[93 kg] |
| Environmental conditions: | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95F [5 - 35C] Humidity range: up to 80% relative humidity at 31C, decreasing linearly to 50% relative humidity at 40C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95F [5 - 35C] Humidity range: up to 80% relative humidity at 31C, decreasing linearly to 50% relative humidity at 40C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95F [5 - 35C] Humidity range: up to 80% relative humidity at 31C, decreasing linearly to 50% relative humidity at 40C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95F [5 - 35C] Humidity range: up to 80% relative humidity at 31C, decreasing linearly to 50% relative humidity at 40C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 |
| Conformance: | CE, UKCA | CE, UKCA | CE, UKCA | CE, UKCA |
| Warranty: | 3 years [see individual statement for further details] | 3 years [see individual statement for further details] | 3 years [see individual statement for further details] | 3 years [see individual statement for further details] |
Mark-10 Series F + EasyMESUR Tension/Compression Force Testers Features
- Rigid and precise by design - Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.006 in / 0.15 mm under any load, at any position. Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
- Conveniently modular -Frame bases can be removed to accommodate column extensions and alternative mounting configurations. Most electronics are housed in a self-contained enclosure, easily accessed and replaced if needed. Integrated T-slots along the column accommodate add-ons.
- Limit switches - Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.
- Seamless force sensor interface - Series FS05 smart force sensors mount directly to the crosshead of models F105, F305, F505, and F505H, without any connection cables. Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN]. Accurate to ±0.1% of full scale. Series FS06 S-beam type force sensors mount to models F105, F305, F505, and F505H, recommended when using heavy and bulky grips. Ranges available from 50 to 500 lbF [250 N to 2.5 kN].
- Easy-to-service electronics - Most electronics are housed in an integrated module, easily replaced without special tools or processes.
Resources
Videos
Mark-10 Series F + EasyMESUR Tension/Compression Force Testers Video (youtube)
News
In the Box
 | The F105-EM, F305-EM, F505-EM, and F505H-EM advanced test frames are shipped as shown at left, and includes the following accessories:
|
 | The F755-EM, F755S-EM, F1505-EM, and F1505S-EM advanced test frames are shipped as shown at left and include the following accessories:
|
