Mark-10 Model WT3-201 AccessoriesDecember 3, 2021
MESUR gauge software
Ring terminal fixture for WT3-201
Machinable blank terminal fixture
Carrying case for WT3-201
Calibration kit for WT3-201 (weights not included)
Cable, WT3-201 ...Mark-10 Model WT3-201 Wire Crimp Pull Tester
Please note that this is an obsolete product.
This product is obsolete and has been replaced by the WT-205.
The Mark-10 Model WT3-201 Wire Crimp Pull Tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]). The tester accommodates most insulation types. Samples can be sent to Mark-10 for evaluation prior to purchase.
A large, backlit graphic LCD displays easy-to-read values, including real-time force, peak force, programmable pass/fail limits, units of measurement, and more. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. An analog load bar is shown on the display for graphical representation of applied force.
On-board data storage for up to 1,000 readings is included, as are statistical calculations and output to a PC. Unique automatic output / data storage / zeroing upon sample break helps automate testing processes.
An optional ring terminal fixture may be used with the Mark-10 Model WT3-201 Wire Crimp Pull Tester to secure ring terminations, and an optional carrying case makes transportation simple and safe.
Manufacturer:
Mark-10
Types:
Wire Crimp Pull Testers
Models
| Model | Description | Add to Quote |
| WT3-201 | Wire terminal tester, 200 lbF, 110V | Add to Quote |
| WT3-201E | Wire terminal tester, 200 lbF, 220V EUR | Add to Quote |
| WT3-201U | Wire terminal tester, 200 lbF, 220V UK | Add to Quote |
| WT3-201A | Wire terminal tester, 200 lbF, 220V AUS | Add to Quote |
| CERT | Certificate of calibration with data | Add to Quote |
| 15-1004 | MESUR®gauge software | Add to Quote |
| WT3002 | Ring terminal fixture for WT3-201 | Add to Quote |
| WT3003 | Machinable blank terminal fixture | Add to Quote |
| WT3004 | Carrying case for WT3-201 | Add to Quote |
| AC1049 | Calibration kit for WT3-201 (weights not included) | Add to Quote |
| 09-1163 | Cable, WT3-201 to RS-232” | Add to Quote |
| 09-1165 | Spare USB cable | Add to Quote |
| 08-1026 | Spare rechargeable battery | Add to Quote |
| AC1030 | Spare AC adapter, 110V” | Add to Quote |
| AC1031 | Spare AC adapter, 220V EUR” | Add to Quote |
| AC1032 | Spare AC adapter, 220V UK | Add to Quote |
| AC1035 | Spare AC adapter, 220V AUS | Add to Quote |
Information
Mark-10 Model WT3-201 Wire Crimp Pull Tester
| Specification | |
| Capacity x Resolution: | 200 x 0.1 lbF, 3200 x 2 ozF, 100 x 0.05 kgF, 1000 x 0.5 N, 1 x 0.0005 kN |
| Accuracy: | ±0.2% of full scale |
| Wire gauge range*: | AWG30 - AWG3* |
| Wire diameter range: | 0.01 - 0.25 in [0.3 - 6.3 mm] |
| Minimum sample length: | 6.5 in [165 mm], excluding termination |
| Maximum sample elongation: | 1.15 in [29.2 mm] |
| Power: | AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low. |
| Battery Life: | Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use |
| Sampling rate: | 7,000 Hz |
| Outputs: | USB / RS-232: Configurable up to 115,200 baud. Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices. Analog: ±1 VDC, ±0.25% of full scale at capacity. Set points: Three open drain lines. |
| Safe overload: | 150% of full scale (display shows OVER at 110% and above) |
| Weight: | 16.1 lb [7.3 kg] |
| Warranty: | 3 years (see individual statement for further details) |
Mark-10 Model WT3-201 Wire Crimp Pull Tester Features
- Measures real-time and peak force values
- Ergonomic lever operation produces 200 lbF [1,000 N]
- USB, RS-232, Mitutoyo (Digimatic), and analog outputs
- Automatic output / data storage / zeroing upon sample break helps automate testing processes
- 1,000-point data memory with statistics and outputs
- Password protection prevents unauthorized changes
- Programmable set point indicators and outputs for pass/ fail determination
- High-speed 7,000 Hz sampling rate accurately captures peak force values
- Configurable audio alarms and key tones
- Mounting holes for bench mounting
Accessories
Manuals
Spec Sheets
Videos
Mark-10 Model WT3-201 Wire Crimp Pull Tester Video (youtube)
In the Box
 | The WT3-201 Wire Crimp Pull Tester is shipped as shown at left, and includes the following accessories:
|
