Chatillon TT Series Pneumatic Tester (500 lbf / 2.5 kN)

The CHATILLON TT Series is a pneumatically-operated tester for measuring breaking strength of electrical leads, terminals, connectors, wire wraps, etc. It is ideal for areas where intrinsic safety is required (when used with a mechanical gauge).

The TT Series Tester operates using clean, dry air with a maximum air pressure up to 160 psig (11.2 bar). The TT Tester meets MIL-T-7928 (ASG) requirements for crimped, solderless lugs. The tester may be used for tensile or compression testing. The rapid test speed makes it ideal for production line testing, incoming inspection testing or for the R&D laboratory. The TT Tester features a 6-inch (15 cm) test stroke. Ram speed may be controlled as low as 0.1-inch (2.5 mm) per minute.

The TT Tester is available in two models: one with a foot-actuated switch; the other with a hand-actuated switch.

read more
  • Tensile; Simple to Operate
  • Meets MIL-T-7928 (ASG) Requirements
  • 6-inch Stroke
  • Precise Ram Speed Control to 0.1 in/min
  • Independent Return Speed
  • Automatic Retracting Jaws
  • Mounts to Chatillon DF Series Force Gauges
  • 1 Year Warranty
Capacity500 lbf, 2.5 kN
ActuatorHand-operated OR Foot Pedal
Sample SizeUp to 15 inch (380mm) 7/32 OD
Crosshead Speed6 in/min
Travel6 inches (152mm)Jaw Opens:7/32 inch (5.6mm)Jaw Closes:1/2 inch (12mm)
Load MeasurementChatillon DF Gauges / DF-II Gauges
Air MotorFor 225 lbf (1 kN): Requires 60 psi (4.2 bar)For 550 lbf (2.5 kN):Requires 125 psi (8.7 bar)
Operating Temperature40F to 110F
5C to 45C
Instrument Weight50 lbs (25 kg)
Shipping Weight65 lbs (30 kg)
ML3317500 lbf, 2.5 kN
ML3353500 lbf, 2.5 kN