B-TEK Hybrid-AT Truck Scale LiteratureHybrid-AT Truck Scale Brochure
B-TEK Hybrid-AT Truck Scale
The B-TEK Hybrid-AT Truck Scale features weighbridge modules built with 12′ wide flange I-beams for superior structural support. The I-beams are equally distributed across the width of the platform and oriented longitudinally similar to the design of a highway road bridge. The Hybrid-AT is designed and manufactured to provide years of dependable service.
Manufacturer:
B-Tek Scales
Types:
Steel Deck Truck Scales
Industries:
Chemical & Petrochemical, Manufacturing, Plastics & Polymers, Shipping & Freight, Transportation & Logistics
Applications:
Bulk Material Weighing, Shipping and Logistics, SOLAS Required Shipping Container Weighing
Information
B-TEK Hybrid-AT Truck Scale Options
- Sight Rail Standard 8” and Custom 12” Heights
- Sight Rail Single and Dual Pipe Custom 24” Height
- Grain Dump
- Safety Yellow Sight Rail
- Access Manhole
- 11’ and 12’ End Wall Coping
- Riser Blocks – 2” – 4” and 6”
- End-Wall Checking Plates
- Foundation Anchor Bolts
B-TEK Hybrid-AT Truck Scale
| Standard Sizes | (Custom Sizes | Available) | |
| 12' x 10' | 12' x 11' | 24' x 10' | 24' x 11' |
| 36' x 10' | 36' x 11' | 48' x 10' | 48' x 11' |
| 60' x 10' | 60' x 11' | 72' x 10' | 72' x 11' |
| 84' x 10' | 84' x 11' | 96' x 10' | 96' x 11' |
| 108' x 10' | 108' x 11' | 120' x 10' | 120' x 11' |
B-TEK Hybrid-AT Truck Scale Features
- Certificate of Conformance: 03-096A3
- Type: Above ground flat top and pit installation
- Scale Capacity: Up to 270,000 lbs.
- Concentrated Load Capacity: 80,000 lbs.
- “r” Factor Rating: 2.35
- Scale Height: 16”
- Available Widths: 10’ – 14’
- Weighbridge Deck: 1/4” tread plate decking
- Steel Preparation: Commercial blast cleaning SSPC-SP6
- Paint System: Cross-Linked two-part Epoxy – 2 to 4 mil primer base coat Two-part UV resistant Polyurethane – 2 to 4 mil top coat
- Load Cell: 75K CPR-M analog compression-column load cell, 700 Ohm, 2 mV/V Stainless steel hermetically sealed (IP68) construction
- Load Cell Cable: Stainless steel sheathed cable with clear polymer coating, integral
- Junction Box: NEMA 4X FRP enclosure(s) and B-TEK 4-cell summing board with GDT surge protection
- Surge Protection: CPR-M analog load cells utilize ground straps and base plate isolation disc Surge protection enhanced by Tripp-Lite Isobar Ultra 4-Outlet line transient protection device
- 5-Year weighbridge warranty covering defects in materials and workmanship
- 5-Year components warranty covering defects in materials and workmanship
- 5-Year surge / lightning warranty covering CPR-M load cells and summing boards
Literature
Spec Sheets
B-TEK Hybrid-AT Truck Scale Spec SheetHybrid-AT Truck Scale Spec Sheet
Application Stories
