FS05-500
Mark-10 Series FS05 Tension and Compression Force Sensors

Mark-10 Series FS05 Tension and Compression Force Sensors measure tension and compression forces. They mount directly to the crosshead of models F105, F305, F505, and F505H test frames, for a clean, integrated look. With Plug & Test technology, all configuration and calibration data is saved within the Mark-10 Series FS05 Tension and Compression Force Sensors, allowing them to be calibrated on the test frame or off-site with a Mark-10 indicator (optional adapter: AC1083 required ). Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN]. Note: An AC1083 adapter is required to use FS05 force sensors with the following test frames: F755, F755S, F1505, and F1505S.

Model:FS05-500
Capacity x Resolution;lbF:500 x 0.2
ozF:8000 x 5
gF:-
kgF:250 x 0.1
N:2500 x 1
kN:2.5 x 0.001
mN:-

View Product Details

Models for this Product:
FS05-012,  FS05-025,  FS05-05,  FS05-2,  FS05-5,  FS05-10,  FS05-20,  FS05-50,  FS05-100,  FS05-200,  FS05-300,  FS05-500

Manufacturer:
Mark-10

Types:
Force Measurement Load Cells and Sensors