Mark-10 Model WT3-201M Wire Crimp Pull Tester

The Mark-10 Model WT3-201M Wire Crimp Pull Tester is designed to measure pull-off forces of up to 200 lbF [1 kN] for wire and tube terminations. The tester conforms to numerous UL, ISO, ASTM, SAE, MIL, and other requirements for destructive testing. Non-destructive testing is also possible, such as pulling to a load or maintaining a load for a specified period of time, as per the requirements of UL 486A/B. Programmable pass/fail limits with red and green indicators and audio alerts help identify non-conforming samples. The tester accommodates most insulation types and wire sizes up to AWG 3 (0.25 in [6.3 mm] OD). Samples can be sent to Mark-10 for evaluation prior to purchase. Auto-start automatically begins the test when the wire sample has been loaded. When the sample breaks, the tester can auto-reverse, output the peak force, store the peak force, and zero the display automatically, thereby increasing testing throughput. Further testing efficiency is achieved via the available Profiles function, through which multiple test setups may be saved and recalled as required. On-board data storage and statistical calculations is provided for up to 2,000 readings, with available date and time stamp for each saved data point. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. The Mark-10 Model WT3-201M Wire Crimp Pull Tester includes MESUR Lite data acquisition software. MESUR Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.

Description:Ring terminal fixture for WT3-201M

View Product Details

Models for this Product:
WT3-201M,  WF010,  WF011,  WF012,  WF013,  WFCOMP,  CERT,  15-1004,  WT3004,  WT3002,  WT3003,  AC1049,  09-1163,  09-1165


Wire Crimp Pull Testers