Nicol Scales & Measurement has climate-controlled calibration laboratories located in Dallas and Houston, and our team of professionals has an average of 15 years of experience to handle your calibration needs. Most equipment calibrations can also be performed on-site at your location if you prefer. NSM offers ISO 17025 accredited and NIST traceable calibrations depending upon the equipment and customer needs, and customers can access our password protected on-line calibration certificate system as well.
What We Calibrate
Metrology Calibration Services > What We Calibrate
Mass & Force
| Equipment or Device | Range or Nominal Device Size | Notes | ISO Accreditation | Onsite |
| Balance | 0 - 12,200 grams | |||
| Cable Tensionmeter | ||||
| Center of Gravity | ||||
| Crane Scale | 0 - 200,000 lbs. | |||
| Dynamometer | 0 - 100,000 lbs. | |||
| Force Gauge | 0 - 100,000 lbs. | |||
| Huskie Tool | ||||
| Load Cell | 0 - 100,000 lbs. | |||
| Material Test Machine | ||||
| Penetrometer | ||||
| Scale | ||||
| Scale | 0 - 40,000 lbs. | Dial,Beam, Bench and Floor | ||
| Scale | 0 - 200,000 lbs. | Vehicle, Axle Load,Hopper and Livestock | ||
| Weight per Gallon Cup | ||||
| Weight Verification | 0 -5000 lbs. |
Request a Calibration
Mass & ForceScales, Balances, Weights, Force Gauges, Load CellsDimensional
| Equipment or Device | Range or Nominal Device Size | Notes | ISO Accreditation | Onsite |
| Caliper | 0 - 72 inches | Dial, Digital or Venier | ||
| Crimpers | ||||
| Dial Indicators | 0 - 2 inches | Dial or Digital | ||
| Test Indicators | 0 - 0.130 inches | |||
| Protractor | ||||
| Feeler Gauge | ||||
| Gauge Blocks | ||||
| Height Gauge | 0 - 12 inches | |||
| Length Standard | 0 - 12 inches | |||
| Level | ||||
| Measuring Tape up to 100" | 0 -100 feet | |||
| PI Tape | ||||
| Steel Ruler | 0 - 60 inches | |||
| Depth Micrometer | 0 - 12 inches | Digital or Venier | ||
| ID Micrometer | 0 -12 inches | Digital or Venier | ||
| OD Micrometer | 0 -12 inches | Digital or Venier | ||
| Tube Micrometer | 0 -12 inches | Digital or Venier | ||
| Optical Comparator | ||||
| Pin Gauge | 0 - 1 inch | |||
| Plain Ring Gauge | 0 - 10 inches | |||
| Thread Plug Gauge | 0-80 to 4-12 | |||
| Coating Thickness Gauges 0 to 80000 mil | ||||
| Viscosity Cup |
DimensionalCalipers, Micrometers, Length StandardsElectrical
| Equipment or Device | ISO Accreditation | Onsite |
| Black Body | ||
| Clamp Meter | ||
| Data Logger | ||
| Electronic Meter | ||
| Megohmmeter | ||
| Mold Press | ||
| Bench Multimeter | ||
| Handheld Multimeter | ||
| Power Supply AC/DC & Current | ||
| Process Calibrator | ||
| Resistance Tester | ||
| Shunt | ||
| Solder Station |
ElectricalMulti Meters, Volt Meters, Ohm MetersTemperature
| Equipment or Device | ISO Accreditation | Onsite |
| Rod Oven | ||
| RTD | ||
| Incubator (Time/Temp) | ||
| Refrigerator | ||
| Autoclave | ||
| Circle Strip Chart Each Input | ||
| Dry Block Calibrator | ||
| Flux Oven | ||
| Heat Sealer (Temperature & Pressure) | ||
| Hot Plates | ||
| Oven | ||
| Oven Uniformity Survey | ||
| Strip Chart (per input) | ||
| Temperature Controller -250C to 1820C | ||
| Temperature Data Logger | ||
| Water Bath | ||
| Thermometer Digital | ||
| Thermometer IR | ||
| Thermometer L.I.G. -20C to -200C |
TemperatureThermometers, Oven Controllers, Flux & Rod OvensMechanical
| Equipment or Device | Range or Nominal Device Size | Notes | ISO Accreditation | Onsite |
| Centrifuge | ||||
| Durometer Block | ||||
| Durometer | Type A | |||
| Footage Counter | ||||
| Hardness Tester Rockwell | HRC and HRBW | |||
| Tachometer up to 99999 RPM | ||||
| Torque Wrench | 0 - 600 ft/lbs. |
MechanicalTorque, HardnessTime & Frequency
| Equipment or Device | Range or Nominal Device Size | ISO Accreditation | Onsite |
| Timer | 1- 86,400 seconds | ||
| Stopwatch | 1- 86,400 seconds |
Time & FrequencyTachometers, Timers, StopwatchesPressure
| Equipment or Device | Range or Nominal Device Size | ISO Accreditation | Onsite |
| Pressure Transducer | 0 - 20,000 psi | ||
| Vacuum Gauge | -28 to 0.1 inHg | ||
| Pressure Gauge | 0 - 20,000 psi |
PressurePressure / Differential / Vacuum / Compound GaugesLiquid
| Equipment or Device | Range or Nominal Device Size | ISO Accreditation | Onsite |
| PH Meter up to 14pH | 4, 7 and 10 pH | ||
| Pipette | 60 uL to 10 mL | ||
| Viscometer 500 - 5000 | 1 kPa to 104 kPa |
LiquidPipettes, pH and ViscosityWelding Machines
| Equipment or Device | ISO Accreditation | Onsite |
| Welding Machine | ||
| Hard Banding Machine |
Welding MachinesTIG Welders, Spot Welders, MIG WeldersLost Revenue Calculator
Be confident that your scale is showing accurate weight every time it measures a product. Delaying scale maintenance can cost your business thousands of dollars every year.
Just change the following numbers to reflect your business, and see what a difference it can make!
Number of weighings
per day
Price of product
$
per lb
Estimated scale error
lbs
| $1.00 | - Average loss per weighing |
| $50.00 | - Lost per day |
| $18,250.00 | - Lost per year |
Accreditations
At Nicol Scales & Measurement quality and safety are our top priorities. We earned our ISO/IEC 17025:2005 accreditation for our Dallas and Houston branches in 2000. We pride ourselves on an industry leading EMR (Experience Modification Rating), $6,000,000 of liability insurance and third party safety and regulatory certifications from multiple independent agencies. We welcome customer audits to review our documented safety training program or our quality system.
View our 17025 accreditation
View our