1. B-Tek Scales
  2. B-TEK Drum Scale

B-TEK Drum Scale Features

Posted on December 7, 2016
  • Carbon Steel
    • NON-NTEP
    • Low profile above ground
    • 1,000 – 5,000 lbs
    • 1-1/2″ nominal deck height
    • 2′ x 2′ to 4′ x 4′ – Custom sizes upon request
    • 1/4″ carbon steel tread plate deck with live side rail design
    • Side access FRP junction box, leveling foot adjustment holes in side rail
    • Cross-Linked two-part Epoxy – 2 to 4 mil primer base coat
    • Two-part UV resistant Polyurethane – 2 to 4 mil top coat
    • Plated Alloy Steel, 350 Ohms, 3.0 mV/V load cell
  • Stainless Steel
    • NON-NTEP
    • Low profile above ground
    • 1,000 – 5,000 lbs
    • 1-1/2″ nominal deck height
    • 2′ x 2′ to 4′ x 4′ – Custom sizes upon request
    • 1/4″ 304 stainless steel smooth deck with live side rail design
    • Side access FRP junction box, leveling foot adjustment holes in side rail
    • All exposed surfaces are blasted to a clean consistent finish
    • Stainless Steel (IP67), 350 Ohms, 3.0 mV/V load cell

This article is linked to the following:


B Tek logo sizedB-Tek ScalesB-TEK Scales has a proud history that reaches back further than its 1994 inception. The long term knowledge of the weighing…
B-TEK Drum ScaleB-TEK Drum ScaleThe B-TEK Drum Scale is designed for long life and ease of use in tough environments. The low profile (1.5")…
B Tek logo sized

Categories:Features

Manufacturer:
B-Tek Scales